CONTENT
- Introduction
- DYON output
- Files provided
- Running the scripts
- The main files (functions 'put_to_IMAS', 'get_from_IMAS' and test scripts)
- IDS core_profiles
- IDS core_sources
- IDS equilibrium
- IDS gas_injection
- IDS magnetics
- IDS radiation
- IDS wall
- Service functions
- DYON input
- To be done
1. Introduction
This page contains a description of MATLAB scripts supporting the storage of DYON input and output data files in IMAS.
The repository folder of the DYON output wrapper is ~g2yyakov/public/dyon/stable.
This document can be found on the ACH-PSNC Confluence page (DYON IMASification - Scientific Worfklows - PCSS Confluence (psnc.pl), https://docs.psnc.pl/display/WFMS/DYON+IMASification).
2. DYON output
The storage of the DYON output in IMAS is supported by two MATLAB functions, put_to_IMAS and get_from_IMAS. Depending on the situation, they can be integrated to the code or used separately as wrappers providing the connection between DYON and IMAS. The scripts test_put_to_IMAS and test_get_from_IMAS are provided, which illustrate how the functions can be called as wrappers.
The available IMAS Data Dictionary (DD) does not satisfy all requirements of DYON. Therefore, the functions put_to_IMAS and get_from_IMAS are to be extended after the planned extension of the DD.
Now the output data are placed into 7 IMAS IDS's (Interface Data Structures - sections of the IMAS DD describing tokamak subsystems or tokamak physics chapters): 'core_profiles', 'core_sources', 'equilibrium', 'gas_injection', 'magnetics', 'radiation', and 'wall' (this list is to be extended). The allocation of the data in the IDS's and the functions supporting it are described below.
2.1. Files provided
File name | Content |
---|---|
put_to_IMAS.m | Function saving IMAS output data to IMAS |
get_from_IMAS.m | Function reading IMAS output data from IMAS |
test_put_to_IMAS.m | Sample script invoking the function put_to_IMAS |
test_get_from_IMAS.m | Sample script that invokes the function get_from_IMAS and compares the recovered data with the initial ones |
put_core_profiles.m | Function saving data to the 'core_profiles' IDS |
put_core_sources.m | Function saving data to the 'core_sources' IDS |
put_equilibrium.m | Function saving data to the 'equilibrium' IDS |
put_gas_injection.m | Function saving data to the 'gas_injection' IDS |
put_magnetics.m | Function saving data to the 'magnetics' IDS |
put_radiation.m | Function saving data to the 'radiation' IDS |
put_wall.m | Function saving data to the 'wall' IDS |
get_core_profiles.m | Function recovering the saved data from the 'core_profiles' IDS |
get_core_sources.m | Function recovering the saved data from the 'core_sources' IDS |
get_equilibrium.m | Function recovering the saved data from the 'equilibrium' IDS |
get_gas_injection.m | Function recovering the saved data from the 'gas_injection' IDS |
get_magnetics.m | Function recovering the saved data from the 'magnetics' IDS |
get_radiation.m | Function recovering the saved data from the 'radiation' IDS |
get_wall.m | Function recovering the saved data from the 'wall' IDS |
arrange_ion_densities.m | Function putting the densities of all charge states and the properties of an ion to 'core_profiles' |
arrange_neutral_density.m | Function putting the density and the properties of a neutral atom to 'core_profiles' |
arrange_radiation.m | Function arranging the radiation power density (together with all atom attributes) for given radiation type and neutral/ion kind |
extract_ion_densities.m | Function extracting the densities of all charge states from the 'core_profiles' IDS |
find_source.m | Function finding the location of the source with a given data dictionary index in an AoS |
find_species.m | Function finding the location of the species with a given label in AoS |
compare_core_profiles.m | Function comparing the data restored from the 'core_profiles' IDS with the initial content |
compare_core_sources.m | Function comparing the data restored from the 'core_sources' IDS with the initial content |
compare_equilibrium.m | Function comparing the data restored from the 'equilibrium' IDS with the initial content |
compare_magnetics.m | Function comparing the data restored from the 'magnetics' IDS with the initial content |
compare_radiation.m | Function comparing the data restored from the 'radiation' IDS with the initial content |
compare_wall.m | Function comparing the data restored from the 'wall' IDS with the initial content |
STEP_10003_N_O_impurities_Cwall_2022_11_12_17_53_27.mat | Example of MAT-file with DYON results (received from Kim Hyun-Tae) |
STEP_10003_v4_600kW_EBWCD_2022_6_20_21_24_29.mat | Example of MAT-file with DYON results (received from Kim Hyun-Tae) |
README.txt | Brief user guide |
DYON-IMAS_wrappers_user_guide.pdf | This documentation in PDF-format |
2.2. Running the scripts
To launch the test scripts, do the following:
1. Enter:
module load imasenv/<IMASversion>
Here <IMASversion> is 3.37.0 or higher.
2. The scripts in its present form use the IMAS database 'step'. If you are planning to use it and this database is non-existent, enter the following command to create the database:
imasdb step
You can replace 'step' with another IMAS database name, but do not forget to create it and change the variable 'machine' in test_put_to_IMAS.m and test_get_from_IMAS.m.
3. Enter either
matlab
or
matlab -nodesktop -nosplash
In the nodesktop mode, MATLAB should work faster (I did not notice a significant difference - YY). When using the nodesktop mode, do not forget to run the command 'quit()' to end the session (otherwise, a dangling MATLAB session may remain).
4. Run test_put_to_IMAS.m in order to save in IMAS the data from an available DYON output MAT-file (you can change shot, run, IDS comments etc. by changing the parameters in this script).
5. Type 'viz' (on a console with imasenv loaded) to see the content of the IMAS database.
6. To get back the DYON output data, run test_get_from_IMAS.m.
2.3. The main files (functions 'put_to_IMAS', 'get_from_IMAS' and test scripts)
The script test_put_to_IMAS.m loads a MAT-file containing the DYON results (the name of the file is defined in the script). It is assumed that there is a structure with the name 'output' among the variables loaded from the MAT-file and that this structure holds all the data that must be saved.
The script then defines the rest of arguments of the function 'put_to_IMAS' and invokes it. The dummy arguments of this function are as follows:
Name | Type | Description |
---|---|---|
output | struct | structure containing the DYON output to be saved |
H_mass | float | mass of the H isotope (in units of the proton mass) |
machine | symbol array | name of the IMAS database (usually a tokamak name) |
shot | int | shot number |
run | int | run number |
comment | symbol array | comment characterizing the saved data (put into each IDS) |
data_source | symbol array | text describing the origin of the data (put into each IDS) |
The function creates an IMAS data entry for the given 'shot' and 'run' parameters (note that the database with the required name must exist; otherwise, an error is raised). Then it invokes several functions that put data to separate IDS's ('put_core_profiles', 'put_core_sources', 'put_equilibrium', 'put_gas_injection', 'put_magnetics', 'put_wall', and 'put_radiation') and closes the database. After that, the content of the 'output' structure is put to IMAS. The DD fields to which the data are placed can be found in the table IMAS interface with DYON - Google Documents. Some more comments will be given in next sections of this document for each IDS separately.
The script test_get_from_IMAS.m defines the input parameters of the function get_from_IMAS and invokes it. The dummy arguments of this function are as follows:
Name | Type | Description |
---|---|---|
machine | symbol array | name of the IMAS database (usually a tokamak name) |
shot | int | shot number |
run | int | run number |
The function calls several functions that extract data from separate IDS's ('get_core_profiles', 'get_core_sources', 'get_equilibrium', 'get_gas_injection', 'get_magnetics', 'get_wall', and 'get_radiation') and closes the database. The function returns the 'output' structure, which is to be equivalent (after the script is complete) to the 'output' structure that was initially put to IMAS. In addition, the function prints to the screen the comments extracted from all IDS.
The script in its current form contains some parts that are used for verification and debugging. It imports ??? and invokes the functions ????
2.4. IDS core_profiles
2.5. IDS core_sources
2.6. IDS equilibrium
2.7. IDS gas_injection
2.8. IDS magnetics
2.9. IDS radiation
2.10. IDS wall
2.11. Service functions
3. DYON input
Description of the scripts processing the DYON input (to be done).
4. To be done
- Extending the input script (pending the planned DD extension)
- Adding code descriptions to all IDS's.
- Switching to the HDF5 IMAS backend (pending HDF5 debugging on Gateway).